Home

View Cart
Checkout

Terms & Conds

Categories+

Fusion Handrail System
- Fusion Glass
- Fusion Pine Handrails
- Fusion Oak Handrails
- Fusion Wall Handrail Kits
- Walnut Fusion Rails
- The Fusion Commercial Range
- Fusion Acrylic Range
Glass Balustrades
- S-Vision Glass Balustrade
- Fusion Glass Stairparts
White Oak Stairparts
- Oak Staircase Cladding
- Heritage Square Range
Hemlock Stairparts
Pine Stairparts
White Pre-Primed Stair Parts
- Pre Primed Newel Posts
- Pre Primed Newel Caps
- Pre Primed Newel Bases
Metal Stair Balusters
- Metal Balusters
Wall Mounted Handrails
- Wall Handrail Sets
- Wall Handrail Brackets
- Handrail End Caps
- Round Handrails
- Pigs Ear Wall Handrails
More..
- Accessories
- Special Offers - Stock Sell Off
- Porch Canopies
- Mouldings
- Traditional Victorian Mouldings in Pine
- Administration
- Best Sellers
- New Products

Stairpart Shop Stair | Fusion Handrail System | Fusion Handrail Connectors | Brushed Nickel Handrail Fittings

Brushed Nickel Handrail Fittings

Fusion Brushed Nickel Bottom Connector MMBCB

Ref: MMBCB

OUT OF STOCK

This bottom connector sits on top of the newel post at the bottom of the stairs and connects to the handrail travelling up the stairs.
Works between the angles of 38º - 45º

The connector is able to be dismantled for installation and comes with self tapping screws.

Price: £28.71 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Top Connector MMTCB

Ref: MMTCB

OUT OF STOCK

The top connector is attached to the Fusion newel post at the top of a flight of stairs and allows the handrail to travel down the stairs.

Works between the angles of 38º - 45º

Comes with self tapping screws

Price: £27.86 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Newel Base Connector MMNCB

Ref: MMNCB

OUT OF STOCK

The Newel Base connector will sit on top of a 82mm or 90mm newel base. The newel post will then sit into the connector.

Comes complete with self tapping screws and newel base fixings.

Dimensions 66mm Diameter x 112mm

Price: £18.15 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Landing Connector MMLCB

Ref: MMLCB

OUT OF STOCK

The landing connector sits on the newel post at the top of the stairs.

Comes complete with self tapping screws.

Price: £19.98 (Excluding VAT at 20%)

OUT OF STOCK

CATALOG SUSPENDED

Fusion Brushed Nickel Intermediate Connector MMICB

Ref: MMICB

OUT OF STOCK

This intermediate connector is used on a flat surface (square newel) and allows the handrail to travel down a flight of stairs.
This is often used when an intermdiate newel is being used.

Works between angles of 38º - 45º

Complete with Self tapping screws.

Price: £35.90 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Horizontal Turn Left Hand Connector MMHTLB

Ref: MMHTLB

OUT OF STOCK

This fittings allows for a left hand return at the top of the stairs onto the landing. This fixing allows for landing handrails to be connected together at a right angle.

Complete with self tapping screw

Price: £16.75 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Horizontal Turn Right Hand Connector MMHTRB

Ref: MMHTRB

OUT OF STOCK

Price: £16.08 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Adjustable Landing Connector MMALB

Ref: MMALB

OUT OF STOCK

This adjustable connector sits on top of the newel post and is used to break up a long landing run or on the corner of a L shaped landing.

Adjustable to be used at almost any angle.

Complete with self tapping screws.

Price: £31.22 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Intermediate Landing Connector ILCBD

Ref: ILCBD

OUT OF STOCK

This intermediate landing connector is used on a mid newel post to a break up a run on a landing.

Price: £26.00 (Excluding VAT at 20%)

OUT OF STOCK

CATALOG SUSPENDED

Fusion Brushed Nickel Wall Connector MMWCB

Ref: MMWCB

OUT OF STOCK

The wall connector is used in place of a traditional half newel. This attached onto a wall, along with the landing handrail.

Comes with self tapping screws

Price: £23.03 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Half Landing Connector MMHLB

Ref: MMHLB

OUT OF STOCK

This is used to connect handrail on a half landing.

Dimensions 59mm Diameter x 122mm

Complete with self tapping screws.

Price: £12.82 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel End Cap MMECB

Ref: MMECB

OUT OF STOCK

The end cap is designed to finish off the tip of the 54mm newel post at the top of a flight of stairs where there is no landing.

This can also be used as an endcap on a handrails.

Dimensions 59mm Diameter x 30mm

Price: £13.86 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Suspended Baserail Connector MMSBCB

Ref: MMSBCB

OUT OF STOCK

This connector attaches to the newel base and allows the Fusion base rail to flow over the top of a stair tread.

For use on Cut String Staircases, suitable for pitches of 38º to 45º.

Complete with self tapping screws

Price: £21.24 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Intermediate Newel Connector MMINCB

Ref: MMINCB

OUT OF STOCK

This fixing is used on a mid newel to break up a run on a flight of stairs.

For use on Cut String Staircases and stairs cases with a longer run than 2400mm The handrail can be split in 2 or run as one continous length.

Suitable for a stair with a pitch between 38º - 45º.

Complete with self tapping screws.

Price: £34.63 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Wall Handrail End Cap MMWECB

Ref: MMWECB

OUT OF STOCK

The handrail end cap is a decorative cap that will fit on the end of a 54mm mopstock handraill.

Accepts the fusion handrail profile only that has a flat underside.

Dimensions 59mm x 84mm

Complete with 2 fixing screws.

Price: £9.26 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Wall handrail Bracket MMWBB

Ref: MMWBB

OUT OF STOCK

This bracket attaches a handrail to a wall.

Wall countersunk fixing holes 3 x 4.5mm diameter
Handrail countersunk fixing holes 2 x 3.75mm diameter.

Supplied with fixing screws.

This bracket fits the fusion handrail as well as other handrail profiles.

Price: £8.62 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Wall handrail Bracket MMWMHB

Ref: MMWMHB

OUT OF STOCK

This bracket attaches a handrail to a wall.

Dimensions 118mm x 71mm x 155mm

Distance of Handrail Centre to wall is 90mm

Wall Countersunk Fixings 3 x 5.2mm Diameter

HandraiL Countersunk Fixing 4 x 4.5mm Diameter

Price: £21.18 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Mid Newel Base Pine with Brushed Nickel NB320PFB

Ref: NB320PFB

OUT OF STOCK

This fixing allows you to install an intermediate newel on a cut string staircase.
The newel is pre finished with a clear varnish and comes with a steel bracket that can be screwed to a step. The trim is provided to hide the steel plate.

Supplied with fixing connector, decorative edge and 82mm x82mm x 320mm newel base.

Price: £16.94 (Excluding VAT at 20%)

OUT OF STOCK

CATALOG SUSPENDED

Fusion Brushed Nickel Square Newel Cap MMSQCB

Ref: MMSQCB

OUT OF STOCK

Fusion Brushed Nickel Square Newel Cap for 90mm Newel Posts.

Price: £24.57 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Brushed Nickel Storey Newel Connector MMSNB

Ref: MMSNB

OUT OF STOCK

This connector can used on a flight of stairs or on a landing. It fastens to a flat surface for a handrail to run up on the angle on a flight of stairs or along a flat landing.

Dimensions 59mm Diameter x 30mm

Price: £29.58 (Excluding VAT at 20%)

CATALOG SUSPENDED

Fusion Commercial Brushed Nickel Handrail Bracket

Ref: WMHB

OUT OF STOCK

This bracket attaches a handrail to a wall. It can also be used to join 2 handrails together.

Dimensions 118mm x 71mm x 155mm
Handrail Centre Distance from Wall 90mm
Wall Countersunk Hole Fixings 3x 5.2mm Diameter
Handrail Countersunk Fixing Holes 4 x 4.5mm Diameter

Price: £24.94 (Excluding VAT at 20%)

OUT OF STOCK

CATALOG SUSPENDED

Fusion Commercial Brushed Nickel Handrail Return Bracket

Ref: WMRB

OUT OF STOCK

Wall mounted return connector allows you to connect the end of a wall handrail to the wall.

Dimension 119.5mm
Handrail centre distance to wall 90mm
Wall Fixing Holes 3 x 5.3mm Diameter - Countersunk 10.2mm Diameter
Handrail Fixing Holdes 2x4.5mm Diameter - Countersunk 10.5mm Diameter

Supplied with fixing screws

Price: £42.92 (Excluding VAT at 20%)

OUT OF STOCK

CATALOG SUSPENDED